Dell PowerEdge iDRAC health checks cheat sheet
Read PowerEdge identity, power state and hardware event history.
iDRAC9 RACADM. Examples use local RACADM installed on the managed host.
Updated · Dell · 7 min read
| Command | What it does |
|---|---|
racadm getsysinfo | Inspect server and iDRAC identity |
racadm serveraction powerstatus | Read server power state |
racadm getsel | Read the System Event Log |
racadm lclog view | Read Lifecycle Controller events |
Walkthrough
Use an approved Dell RACADM installation with appropriate privileges. Remote RACADM connection options differ; never place passwords into shared command history.
Step 1: Inspect server and iDRAC identity
racadm getsysinfo
Compare the service tag, model and management information with the asset under investigation. This helps prevent collecting results from the wrong host.
Step 2: Read server power state
racadm serveraction powerstatus
The powerstatus action only reads the state. Do not substitute powercycle, hardreset or powerdown while diagnosing an active production host.
Step 3: Read the System Event Log
racadm getsel
Correlate hardware faults with the reported interruption and verify timestamps. Preserve SEL entries before any log clearing or component replacement.
Step 4: Read Lifecycle Controller events
racadm lclog view
Compare configuration and lifecycle events with the incident timeline. A recent maintenance event can explain a hardware or firmware inventory change.